需求说明：公司IDC机房有一台服务器A，只有外网环境：192.168.1.150现今须要让这台服务器能对外访问，能正常访问http和https恳求（即80端口和443端口）
操作思路：在IDC机房里另找其他两台有网段环境的服务器B（58.68.250.8/192.168.1.8）和服务器C（58.68.250.5/192.168.1.5）ubuntu 代理上网，且这两台服务器和外网环境的服务器A能互相ping通。（其实也可以将下边B的http和C机器的https代理环境置于一台机器上布署）其中：
在服务器B上布署squid的http代理linux删除，让服务器C通过它的squid代理上网ubuntu 代理上网，能成功访问http
在服务器C上布署squid的https代理LINUX 删除目录，让服务器C通过它的squid代理上网，能成功访问https[须要在顾客端安装stunnel]
一、服务器B上的操作记录（http代理）
1）安装squidyum直接在线安装squid[root@openstack ~]# yum install -y gcc openssl openssl-devel #依赖软件要先提前安装[root@openstack ~]# yum install squid安装完成后，修改squid.conf 文件中的内容，修改之前可以先备份该文件[root@openstack ~]# cd /etc/squid/[root@openstack squid]# cp squid.conf squid.conf_bak[root@openstack squid]# vim squid.confhttp_access allow all #修改deny为allowhttp_port 192.168.1.8:3128cache_dir ufs /var/spool/squid 100 16 256 #打开这个注释，保证/var/spool/squid这个缓存目录存在2）启动squid，启动前进行测试和初始化[root@openstack squid]# squid -k parse #测试2016/08/09 13:35:04| Processing Configuration File: /etc/squid/squid.conf (depth 0)2016/08/09 13:35:04| Processing: acl manager proto cache_object............................2016/08/09 13:35:04| Processing: refresh_pattern . 0 20% 43202016/08/09 13:35:04| Initializing https proxy context[root@openstack squid]# squid -z #初始化2016/08/09 13:35:12| Creating Swap Directories[root@openstack squid]# /etc/init.d/squid startStarting squid: . [ OK ]-------------------------------------------------------------------------------------------如果开启了防火墙iptables规则，则还需要在/etc/sysconfig/iptables里添加下面一行，即允许3128端口访问：-A INPUT -s 192.168.1.0/24 -p tcp -m state --state NEW -m tcp --dport 3128 -j ACCEPT--------------------------------------------------------------------------------------------然后重启iptables服务[root@openstack squid]# /etc/init.d/iptables restart
二、服务器C上的的操作记录（https代理）
1）安装squidyum命令直接在线安装squid[root@openstack ~]# yum install -y gcc openssl openssl-devel #依赖软件要先提前安装[root@openstack ~]# yum install squid[root@openstack ~]# cd /etc/squid/[root@openstack squid]# cp squid.conf squid.conf_bak2）现在开始生成加密代理证书:[root@bastion-IDC squid]# pwd/etc/squid[root@bastion-IDC squid]# openssl req -new > lidongbest5.csrGenerating a 2048 bit RSA private key..........................................................................+++.........................................................................................................+++writing new private key to 'privkey.pem'Enter PEM pass phrase: #输入密码，后面会用到，比如这里输入123456Verifying - Enter PEM pass phrase:-----You are about to be asked to enter information that will be incorporatedinto your certificate request.What you are about to enter is what is called a Distinguished Name or a DN.There are quite a few fields but you can leave some blankFor some fields there will be a default value,If you enter '.', the field will be left blank.-----Country Name (2 letter code) [XX]:cn #国家State or Province Name (full name) []:beijing #省份Locality Name (eg, city) [Default City]:beijing #地区名字Organization Name (eg, company) [Default Company Ltd]:huanqiu #公司名Organizational Unit Name (eg, section) []:Technology #部门Common Name (eg, your name or your server's hostname) []:huanqiu #CA主机名Email Address []:wangshibo@xqshijie.cn #邮箱Please enter the following 'extra' attributesto be sent with your certificate requestA challenge password []:123456 #证书请求密钥，CA读取证书的时候需要输入密码An optional company name []:huanqiu #-公司名称，CA读取证书的时候需要输入名称[root@bastion-IDC squid]# openssl rsa -in privkey.pem -out lidongbest5.keyEnter pass phrase for privkey.pem: #输入上面设置的密码123456writing RSA key[root@bastion-IDC squid]# openssl x509 -in lidongbest5.csr -out lidongbest5.crt -req -signkey lidongbest5.key -days 3650Signature oksubject=/C=cn/ST=beijing/L=beijing/O=huanqiu/OU=Technology/CN=huanqiu/emailAddress=wangshibo@xqshijie.cnGetting Private key修改squid.conf配置文件[root@bastion-IDC squid]# vim squid.confhttp_access allow all #deny修改为allow#http_port 3128 #注释掉https_port 192.168.1.5:443 cert=/etc/squid/lidongbest5.crt key=/etc/squid/lidongbest5.key #添加这一行cache_dir ufs /var/spool/squid 100 16 256 #打开这个注释，保证/var/spool/squid这个缓存目录存在3）重启squid服务[root@bastion-IDC squid]# squid -k parse[root@bastion-IDC squid]# squid -z[root@bastion-IDC squid]# squid reload[root@bastion-IDC squid]# /etc/init.d/squid restart-------------------------------------------------------------------------------------------如果开启了防火墙iptables规则，则还需要在/etc/sysconfig/iptables里添加下面一行，即允许443端口访问：-A INPUT -s 192.168.1.0/24 -p tcp -m state --state NEW -m tcp --dport 443 -j ACCEPT-------------------------------------------------------------------------------------------然后重启iptables服务[root@bastion-IDC squid]# /etc/init.d/iptables restart
三、服务器A（即顾客端）上的操作记录
1）安装配置stunnel关闭客户端的iptables防火墙[root-new-test1 ~]# /etc/init.d/iptables stop[root-new-test1 ~]# cd /usr/local/src/[root-new-test1 src]# pwd/usr/local/src官网下载：http://www.stunnel.org/downloads.html百度云盘下载：https://pan.baidu.com/s/1JXqfB7yc6H2GY9qtBVO4iw 提取密码：4kt8[root-new-test1 ~]#yum install -y openssl openssl-devel gcc[root-new-test1 src]# lsstunnel-5.45.tar.gz[root-new-test1 src]# tar -zvxf stunnel-5.45.tar.gz[root-new-test1 src]# lsstunnel-5.45 stunnel-5.45.tar.gz[root-new-test1 src]# cd stunnel-5.45[root-new-test1 stunnel-5.45]# ./configure[root-new-test1 stunnel-5.45]# make && make install安装完成后，配置stunnel.conf[root-new-test1 stunnel-5.45]# cd /usr/local/etc/stunnel/[root-new-test1 stunnel]# lsstunnel.conf-sample[root-new-test1 stunnel]# cp stunnel.conf-sample stunnel.conf[root-new-test1 stunnel]# lsstunnel.conf stunnel.conf-sample[root-new-test1 stunnel]# cat stunnel.conf #把原来内容清空，写入：client = yes[https]accept = 127.0.0.1:8088connect = 192.168.1.5:443 #运行本机stunnel端口8088连接squid服务端192.168.1.5的443端口，然后在/etc/profile里配置本机8088端口代理（如下）2）启动stunnel服务[root-new-test1 stunnel]# /usr/local/bin/stunnel /usr/local/etc/stunnel/stunnel.conf[root-new-test1 stunnel]# ps -ef|grep stunnelroot 20281 1 0 02:23 ? 00:00:00 /usr/local/bin/stunnel /usr/local/etc/stunnel/stunnel.confroot 20283 13002 0 02:23 pts/0 00:00:00 grep --color stunnel[root-new-test1 stunnel]# lsof -i:8088COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAMEstunnel 20281 root 7u IPv4 745475 0t0 TCP localhost:radan-http (LISTEN)3）配置/etc/profile系统环境变量底部添加下面两行[root-new-test1 stunnel]# vim /etc/profile...............export http_proxy=http://192.168.1.8:3128 #这个是通过服务端A机器的3128端口的squid上网（http代理）export https_proxy=http://127.0.0.1:8088 #这个是通过服务端B机器的443端口的squid上网（https代理）[root-new-test1 stunnel]# source /etc/profile #配置生效4）测试：[root-new-test1 stunnel]# curl http://www.baidu.com #访问80端口ok[root-new-test1 stunnel]# curl https://www.xqshijie.com #访问443端口ok[root-new-test1 stunnel]# yum list #yum可以正常使用[root-new-test1 stunnel]# wget http://www.autohome.com.cn/3442 #wget正常下载
+++++++++++++++++++++++++++++++++++++++++++++++++++
如果客户机是ubuntu系统，则安装配置stunnel记录如下：root@kevin-KVM:~# apt-get install stunnel4root@kevin-KVM:~# cd /etc/stunnel/root@kevin-KVM:/etc/stunnel# lsREADMEroot@kevin-KVM:/etc/stunnel# vim stunnel.conf #手动创建该配置文件client = yes[https]accept = 127.0.0.1:8088connect = 192.168.1.8:443root@kevin-KVM:/etc/stunnel# vim /etc/default/stunnel4......ENABLED=1 #默认为0=========================================================注意：上面的ENABLED一定要修改为1，否则启动stunne服务时会失败，通过status查看报错为：5月 27 00:45:56 kevin-KVM systemd[1]: Starting LSB: Start or stop stunnel 4.x (SSL tunnel for network daemons)...5月 27 00:45:56 kevin-KVM stunnel4[23356]: SSL tunnels disabled, see /etc/default/stunnel45月 27 00:45:56 kevin-KVM systemd[1]: Started LSB: Start or stop stunnel 4.x (SSL tunnel for network daemons).=========================================================接着启动stunne服务root@kevin-KVM:~# /etc/init.d/stunnel4 startroot@kevin-KVM:~# /etc/init.d/stunnel4 restartroot@kevin-KVM:/etc/stunnel# lsof -i:8088COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAMEstunnel4 23625 root 7u IPv4 138476 0t0 TCP localhost:omniorb (LISTEN)然后进行代理的环境变量配置root@kevin-KVM:~# cat /etc/profile......export http_proxy=http://192.168.1.8:3128export https_proxy=http://127.0.0.1:8088root@kevin-KVM:~# source /etc/profile测试上网：root@kevin-KVM:~# curl //www.baidu.comroot@kevin-KVM:~# curl //www.baidu.com
本文原创地址：//lrxjmw.cn/rhrgsijfnwfw.html编辑：刘遄，审核员：暂无
